Russian (Russia) 
Español (España) 
Reliability is the key feature of HKT Quench Cars. With the tough conditions and service life expected, reliability is provided through the experienced selection of materials and manufacturing know-how.
Function:
The 5.5m Quenching Cars is used for carrying the 1000°C hot coke being pushed out from the oven. The quenching car will be hauled to the quenching tower for wet quenching by the locomotive, and then the cooled down coke will be sent to coke wharf.
Technological Characters Of Metallurgical Industry 5.5m Quenching Cars :
1.Has its independent intellectual property;
2.One spotting coke receiving and coke quenching technology is used;
3.New type of heat resistant cast iron plates is used to suit with the working condition of thermal shock
4.Optimized Truss structure, door and floor is used to suit with the working condition of thermal shock;
5.The material of the water board is stainless steel, corrugated structure,resistance to deformation and corrosion;
Description of Metallurgical Industry 5.5m Quenching Cars :
(For reference only, the design can be personalized according to user requirements)
|
Basic Composition |
1.Chassis 2.Bogie 3.Left/right end wall |
|
|
4.Front/rear sidewall 5.Door 6.Bottom plate |
||
|
7.Door opening device |
||
|
The main technical parameters |
Rail gauge |
2800 mm |
|
Carriage’s effective volume |
70 m3 |
|
|
Carriage’s effective length |
7750mm |
|
|
Angle of inclination for the bottom plate |
28° |
|
|
Door’s opening width |
650±20 mm |
|
|
Working pressure of door opening cylinder |
0.45-0.7MPa |
|
|
Cylinder stroke |
400 mm |
|
|
Cylinder diameter |
Φ450 mm |
|
|
Coupling centre to rail surface |
1100 mm |
|
|
Overall dimension (LxWxH) |
12250x6130x5730 mm |
|
|
Dead weight |
105t(approx) |
|
|
Technological Characteristics |
1.DHHI has its independent intellectual property; |
|
|
2.Can meet the process requirements of coke receiving for one spotting ormoving; |
||
|
3.The ball node truss structure is used for the car door, good deformation ability, long service life; |
||
|
4.The material of the water board is stainless steel, corrugated structure,resistance to deformation and corrosion; |
||
|
5. New type of heat resistant cast iron platesare used to suit with the working condition of impacting. |
||
